Configuration of a Full Node With Bitcoin Core Using VPN: Step by Step Guide

As a Bitcoin enthusiast, you are not a foreign complexity of cryptomenic networks. However, one of the challenges that many users face is setting up incoming connections for its full node configuration using a bitcoin core. In this article, we will examine how to configure port forwarding on your router to start the entire knot using the bitcoin core and set it via vpn.

Challenge: Problems with Porting of Ports

When using a traditional Internet Connection, you will be forwarded to porting ports that will allow you to build out of the local network to the internet. However, when you are behind a virtual private network (VPN), this setting may be more complicated. Here is the reason:

* IP Address Changes : When you connect to vpn, your IP address will change to the address of the VPN Service Provider. This means that all outgoing connections from your full node are now directed via vpn.

* VPN Settings Printed : Many VPN Services Have Specific Settings that can affect your local network Behavior. For example, some may block incoming connections or requirement you to use another port number.

Setting vpn on proton

Proton VPN is a popular choice for Bitcoins enthusiasts thanks to its speeds and security features. Here's how to configure the entire node using the Bitcoin Core using Proton VPN:

1.

• 
  Set the VPN Connection : Go to Proton VPN Settings and select the preferred location or country. You can also choose the "Proton VPN" that will connect you directly to the VPN server.

3
configure the Bitcoin core Settings : in the core proton settings, go to the "network" tab and enable the "complete node" function. In the "options" Section, Select "Apply VPN".

• 
  Select your VPN Protocol : Select either UDP or TCP as VPN Protocol. This ensures that the entire node uses the correct port number for incoming connections.

• 
  Configure Port Redirect on Your Router
  
  
  
  
  

After setting up proton vpn, you will need to configure port forwarding to the router. Here are a few steps to be followed:

Step by Step Instructions:

1.

• 
  go to the port redistribution section : look for the "port wedding" section or "virtual server", which is usually based on the "Advanced" or "Setting" Card.

• ** create a new port redirection rule: click the "Add New Rule" button and select "forward" as the Protocol.

• 
  set the forward rule: under the “details of the rule”, enter the following:

* Protocol: TCP

* Local Port: 8332 (Default Port Bitcoin Core)

* Target Address IP: IP Address of Your VPN Server (EG 192.168.1.100)

* Name of VPN Server or Port: Leave It Blank or Enter the name of your Proton VPN Connection

• 
  Save and Test
  
  
  
  : Save the Changes and Test Your Full Connection of the Knots by Starting A New Bitcoin Nuclear Session.

tips and variations

* Use a different port number : If you have trouble forwarding port, try using a different port number (EG 8333) to see if it will solve the problem.

* Check your VPN Settings : Verify that your proton vpn connection is enabled and set correctly in your router.

* Use the VPN tunnel : Consider setting up a vpn tunnel with a bitcoin core that can help you bypass ip address changes and port redirect problems.